It’s Not Too Late!

We understand there is a rush on to get your structures before the ground is frozen and snow is here, but it’s not too late! We are operating with approximately a 4 week turn around right now, which takes us to early November.

We often recommend getting your base in place as soon as you can, whether that’s having us send you anchor posts before delivery, or laying down the beam and foundation with the t-post anchors to be ready once you get the shipment of hoops and other materials.

We also have many years experience in coaching winter installations and can help you prepare. Contact us today for your shelter quote and to get in on our next delivery run your way!

Installation Photo Supplement

In addition to our assembly guide we have a step by step installation supplement and now a photo supplement as well to help with our customer assembled kits. It is NOT MEANT to replace reading the manual and is an
additional supplement only.

Please note, our smaller buildings will have fewer and smaller parts than what is pictured in the slide show. This shows installation with base brackets, NOT anchor posts. Please see assembly guide for further anchor post instruction.

This 24′ x 24′ structure was standing in 4 hours with a team of 4 people.

For best viewing of the photo supplement, click on photo one (top left corner of the grid and scroll through the slide show. Click the “X” in the top left corner to return to the main page.

Please call if you have any further questions after reviewing things. It’s easier to solve challenges before they become problems and with our 40+ years of experience, we can give you custom tips for your specific building to help everything go even smoother.

Winter Storm and Your Structures

Winter Storm & Your Structures

Many areas have been hit with freezing rain today and even though it has generally not been enough to warrant concern for the structures, it is a good time to recap some common things when dealing with ice on buildings.

It is important to note that the ice in itself is not an issue, even a very thick layer actually has enough strength to become self supporting. There are two potential problems though:

  • If the ice stays on the building, it usually has a rough enough texture that subsequent snow will not likely slide off. This scenario lead to major problems in previous winters when we had freezing rain, followed by a dump of snow and then we had rain. This can triple the weight on a building in very short order.
  • The other potential problem happens when you are attempting to remove the ice from the building. If the ice layer is not too significant you can gently bump the cover from the inside. ALWAYS start bumping the cover from the top. This way ice will slide over ice. Starting from the bottom creates a potential where the ice sliding down will fall back against the building and slash the cover. NEVER do all of one side and then the other. Work both sides simultaneously.

If there is the slightest doubt in your mind about the amount of weight on the building, bump the cover from the outside using something with a long handle.

If in doubt please don’t hesitate to ask.