Tag Archives: ontario structures

Featured Add-On: Center Pivoting Gable Vent

We wanted to remind everyone of the center pivoting gable vent that we offer as a simple solution to the challenges of venting a building.

For venting to be effective, it has to be as high as possible. This is a cost effective alternative to costly roof vents.

Part of the window swings in and part of it goes out. Because of this

  • rain is never an issue
  • the window is easy to control even in extreme winds.
  • Incoming air is always deflected up to mix with the warmest air.
  • The tubular steel construction makes it both lightweight and resist twisting over time.

A continuous rope goes from the top of the window to a pulley at the ridge, down to ground level and back up to another pulley and then to the bottom of the window. By tying the rope off to an eye bolt on a gable post, this allows for very simple control from ground level.

Please don’t hesitate to call us for more details or with any questions you have about this option for your building!

vent3Vent4

Winter Storms and Maintenance 

With the upcoming storms in both Ontario and the east coast forecasted, we wanted to remind everyone: it’s okay, and even preferred that the buildings have some snow around them.

This prevents the wind from getting under them and it also means that the height above the ground is less. This significantly decreases the aerodynamic lift.

As we’ve stated in our winter care articles and in the installation guide, there are things you can do to prepare your building to withstand the storms as best as possible. Taking extra steps during the ‘worst case scenario’ situations can often make all the difference and help your building stay standing.

Please don’t hesitate to contact us if you have any questions about any of these situations. Good luck and stay warm!