Tag Archives: ice on structures

Winter Storms and Maintenance 

With the upcoming storms in both Ontario and the east coast forecasted, we wanted to remind everyone: it’s okay, and even preferred that the buildings have some snow around them. 

This prevents the wind from getting under them and it also means that the height above the ground is less. This significantly decreases the aerodynamic lift.

As we’ve stated in our winter care articles and in the installation guide, there are things you can do to prepare your building to withstand the storms as best as possible. Taking extra steps during the ‘worst case scenario’ situations can often make all the difference and help your building stay standing.

Please don’t hesitate to contact us if you have any questions about any of these situations. Good luck and stay warm! 

Merry Christmas and happy new year!! 

Please note Multi Shelter Solutions is now closed for the holidays and will reopen for business January 3rd 2018

We wish you and your family a very happy and joyous holiday season from the entire Multi Shelters team, Norm, Carson, Gwen, Terry, Doug, Jeff, Heather and Andrea

We are grateful to all our new and repeat customers in 2017 and everyone who showed interest and are still working on their planning and we are looking forward to making 2018 even better!

Please stop by Magical Lights of Milton and donate to a great cause for the hospital a day see some spectacular lights. And don’t forget your local foodbank this time of year. 

We wish you all the happiness and abundance and look forward to speaking with you in the new year! 

Winter Storm & Your Structures

We posted this January 4, 2015, but feel it’s important enough with the turn of weather today to repost. We hope you find it helpful.

Many areas have been hit with freezing rain today and even though it has generally not been enough to warrant concern for the structures, it is a good time to recap some common things when dealing with ice on buildings.

It is important to note that the ice in itself is not an issue, even a very thick layer actually has enough strength to become self supporting. There are two potential problems though. If the ice stays on the building, it usually has a rough enough texture that subsequent snow will not likely slide off. This scenario lead to major problems last winter (2014) when we had freezing rain, followed by a dump of snow and then we had rain. This can triple the weight on a building in very short order.

The other potential problem happens when you are attempting to remove the ice from the building. If the ice layer is not too significant you can gently bump the cover from the inside. ALWAYS start bumping the cover from the top. This way ice will slide over ice. Starting from the bottom creates a potential where the ice sliding down will fall back against the building and slash the cover. NEVER do all of one side and then the other. Work both sides simultaneously. If there is the slightest doubt in your mind about the amount of weight on the building, bump the cover from the outside using something with a long handle.

If in doubt please don’t hesitate to ask.