Aerodynamics Considerations on Greenhouses

Aerodynamics is a very complex concept in how it applies to greenhouses and similarly constructed buildings. The better that you understand these dynamics and how to deal with them, the better your chances of having long-term success with the structural integrity of your building.

In many of Norm’s presentations, he has compared the similar shape of a greenhouse to that of an airplane wing. The basic challenge is that you want the opposite result. An airplane needs to efficiently get off the ground while a greenhouse needs to stay where it is.

The greater the distance over a surface is (wing or building), the greater that the lift is. When height is combined with distance, there is a multiplier effect. That is why a pilot will extend the flaps on a wing when taking off and landing.

It is the vacuum on the backside of a structure or a wing that causes the lift. The upward force of the vacuum on the backside is actually double what the leading edge force is.

This effect happens exponentially even when a small change is made. Many people have suggested, “I am only lifting the building two feet (or some other relatively small amount)”. They do not realize that doing that small lift is sometimes adding 50% or even doubling the wind load on the building.

These forces must especially be considered when a structure is oriented so that the prevailing winds hit the sides of the building. Structurally, it is preferable to have the structure facing into the prevailing winds. If the lay of the land or the logistics of how you work in the structure do not allow this, there are ways that the stress on the building can be minimized.

The least expensive way to stiffen a building is to add crossties (also known as collar ties). Crossties tie the left and right sides of the structure together so that the load is more balanced in how it affects the structure. Reducing the hoop spacing will automatically make the structure stronger with a greater ability to resist the effects of external forces.

Ultimately, however, a structure’s ability to deal with the aerodynamics of a situation is only as good as the anchoring provided. Anchors provide stability for resisting up, down and lateral forces. There is no such thing as too many anchors.

These things add to the structural ability to handle things but it does not help the cover. Extra steps must be implemented to secure the sides of the cover. This includes but is not limited to adding extra and longer screws for the cover fastening system.

A discussion on aerodynamics is not complete without discussing windbreaks. The only effective windbreak is trees. Trees restrict the speed of the wind coming through and therefore minimize aerodynamic stresses on a building. There is an optimal distance from a windbreak. This is determined by the size, density and texture of the trees involved. Since this is something that changes with age and season, there is not a perfect formula.

One last note on windbreaks. Another building, especially a bigger building is not an effective barrier. If anything, this building will significantly increase the aerodynamic stresses on your building. Wind will be swirling in one direction and then a slight shift in wind direction will reverse the direction of the swirling.

Please note: We are not engineers and as such can not give structural opinions. The above points are simply items that should be considered and come from 40+ years of experience of watching what wind does to buildings.

Aerodynamics Considerations on Greenhouses

Aerodynamics is a very complex concept in how it applies to greenhouses and similarly constructed buildings. The better that you understand these dynamics and how to deal with them, the better your chances of having long-term success with the structural integrity of your building.

In many of Norm’s presentations, he has compared the similar shape of a greenhouse to that of an airplane wing. The basic challenge is that you want the opposite result. An airplane needs to efficiently get off the ground while a greenhouse needs to stay where it is.

The greater the distance over a surface is (wing or building), the greater that the lift is. When height is combined with distance, there is a multiplier effect. That is why a pilot will extend the flaps on a wing when taking off and landing.

It is the vacuum on the backside of a structure or a wing that causes the lift. The upward force of the vacuum on the backside is actually double what the leading edge force is.

This effect happens exponentially even when a small change is made. Many people have suggested, “I am only lifting the building two feet (or some other relatively small amount)”. They do not realize that doing that small lift is sometimes adding 50% or even doubling the wind load on the building.

These forces must especially be considered when a structure is oriented so that the prevailing winds hit the sides of the building. Structurally, it is preferable to have the structure facing into the prevailing winds. If the lay of the land or the logistics of how you work in the structure do not allow this, there are ways that the stress on the building can be minimized.

The least expensive way to stiffen a building is to add crossties (also known as collar ties). Crossties tie the left and right sides of the structure together so that the load is more balanced in how it affects the structure. Reducing the hoop spacing will automatically make the structure stronger with a greater ability to resist the effects of external forces.

Ultimately, however, a structure’s ability to deal with the aerodynamics of a situation is only as good as the anchoring provided. Anchors provide stability for resisting up, down and lateral forces. There is no such thing as too many anchors.

These things add to the structural ability to handle things but it does not help the cover. Extra steps must be implemented to secure the sides of the cover. This includes but is not limited to adding extra and longer screws for the cover fastening system.

A discussion on aerodynamics is not complete without discussing windbreaks. The only effective windbreak is trees. Trees restrict the speed of the wind coming through and therefore minimize aerodynamic stresses on a building. There is an optimal distance from a windbreak. This is determined by the size, density and texture of the trees involved. Since this is something that changes with age and season, there is not a perfect formula.

One last note on windbreaks. Another building, especially a bigger building is not an effective barrier. If anything, this building will significantly increase the aerodynamic stresses on your building. Wind will be swirling in one direction and then a slight shift in wind direction will reverse the direction of the swirling.

Please note: We are not engineers and as such can not give structural opinions. The above points are simply items that should be considered and come from 40+ years of experience of watching what wind does to buildings.