Tag Archives: cost effective

The benefits of going to a bigger structure

What are some of the benefits of going with a bigger structure over a smaller structure?

Budget often dictates that someone needs to start small, especially when a person is just starting out as a grower with a greenhouse.
There is also the perceived notion that staying smaller means less heating cost. In itself, that is true, since heat loss is in direct proportion to surface area exposed to the outside.

As I have mentioned before, it is very important to weigh expense
against return.

A smaller air volume has less natural circulation.
Proper air circulation for plants is critical regardless of the season.
Think of a deep pond versus a shallow pond. The deep pond never has algae on the surface because of the increased movement.

Going with a taller greenhouse will automatically increase the circulation the same way.

Another point to consider with a taller greenhouse, is that there is more open space above the plants.

This open space is where moisture can go, away from the plants even before the greenhouse ventilation system does its job.

With a lower greenhouse, moisture is always in close proximity to the plants. In a taller structure, the plants will be dry much sooner.

Moist plants in a stagnant air mass are prone to disease. These plants will, as a result, produce less.

As always, be aware of the bigger picture.

Center pivoting gable vent

We are pleased to introduce our center pivoting gable vent as a simple solution to the challenges of venting a building. For venting to be effective, it has to be as high as possible. This is a cost effective alternative to costly roof vents.

Part of the window swings in and part of it goes out. Because of this, rain is never an issue and the window is easy to control even in extreme winds. Incoming air is always deflected up to mix with the warmest air. The tubular steel construction makes it both lightweight and resist twisting over time.

A continuous rope goes from the top of the window to a pulley at the ridge, down to ground level and back up to another pulley and then to the bottom of the window. By tying the rope off to an eye bolt on a gable post, this allows for very simple control from ground level.

Vent4

vent3