Tag Archives: tarps

Building Ends on an MSS Structure

One of the beauties of a Multi Shelter is the flexibility of the ends. By building the ends according to your needs your new building can and will truly prove useful.

It is important to remember that you need to be very careful when you have one end closed and the other end open.

When one end is closed you could potentially create a “parachute effect” (trapping air, creating lift) and put a lot of added stress on your building and especially the cover. Call us to discuss ways of minimizing this if your circumstance really would require one end open and one end closed.

When planning ends, it is important to have sufficient vertical framing to support wind load, doors, fans, etc. The spacing between the vertical framing will be determined by the amount of opening space required for the doors, etc.

It is important to remember that where ever possible, framing needs to go from top to bottom. In the event of large openings, the related framing will need to be doubled or tripled.

It is also important to remember that when you are covering your end with tarp, the top end of the cover is sandwiched between the wirelock channel and the hoop.

When you are covering with plastic, you will be fastening the top end inside the channel with the roof cover even if your roof is a double layer.

Please see the two pages in the installation guide for more information as well as photos: Ends & Door Options

Building Ends

One of the beauties of a Multi Shelter is the flexibility of the ends. By building the ends according to your needs your new building can and will truly prove useful.

It is important to remember that you need to be very careful when you have one end closed and the other end open.

When one end is closed you could potentially create a “parachute effect” (trapping air, creating lift) and put a lot of added stress on your building and especially the cover. Call us to discuss ways of minimizing this if your circumstance really would require one end open and one end closed.

When planning ends, it is important to have sufficient vertical framing to support wind load, doors, fans, etc. The spacing between the vertical framing will be determined by the amount of opening space required for the doors, etc.

It is important to remember that where ever possible, framing needs to go from top to bottom. In the event of large openings, the related framing will need to be doubled or tripled.

It is also important to remember that when you are covering your end with tarp, the top end of the cover is sandwiched between the wirelock channel and the hoop.

When you are covering with plastic, you will be fastening the top end inside the channel with the roof cover even if your roof is a double layer.

Please see the two pages in the installation guide for more information as well as photos: Ends & Door Options

Building Ends

One of the beauties of a Multi Shelter is the flexibility of the ends. By building the ends according to your needs your new building can and will truly prove useful.

It is important to remember that you need to be very careful when you have one end closed and the other end open. When one end is closed you could potentially create a “parachute effect” (trapping air, creating lift) and put a lot of added stress on your building and especially the cover. Call us to discuss ways of minimizing this if your circumstance really would require one end open and one end closed.

When planning ends, it is important to have sufficient vertical framing to support wind load, doors, fans, etc. The spacing between the vertical framing will be determined by the amount of opening space required for the doors, etc. It is important to remember that where ever possible, framing needs to go from top to bottom. In the event of large openings, the related framing will need to be doubled or tripled.

It is also important to remember that when you are covering your end with tarp, the top end of the cover is sandwiched between the wirelock channel and the hoop. When you are covering with plastic, you will be fastening the top end inside the channel with the roof cover even if your roof is a double layer.

Please see the two pages in the installation guide for more information as well as photos: Ends & Door Options

Choosing A Cover

One of the things that sets MSS apart is with the cover choices we offer. Everyone wants to save money but they also want value for the dollars invested. The two main areas of covers we offer are the 12mil woven tarps and the 6mil plastic. (Other options available, call to confirm) Both of these choices are by no means the heaviest that are out there, but they do provide excellent life span for the investment.

When you consider the cost per year on our 12mil white tarps, which have an 8-10 year expected lifespan, they stack up very favourably to the 20-24mil covers that are available. The main reason 12mil is even an option for us to use is that our hoops or ribs are much closer together and therefore provide much more support to the cover.

Using 6mil plastic gives even more options. Going clear (greenhouse) allows the necessary light transmission for plant growth. Going white (livestock) allows light while still providing a shade factor. The option of a double layer with air between, provides even more benefits for heat loss and condensation reduction and added stiffness in extremely windy locations. The biggest attraction for the 6mil plastic is the life span you get for the investment.

Call to get your custom quote today. We would be happy to help you.