Tag Archives: movable

Season Extension: Hanley Caterpillar Tunnels

The third area to discuss regarding season extension are those structures that are simple enough to disassemble and relocate to another spot-primarily referring to Hanley Caterpillar Tunnels.

The real lure of these buildings is their low cost and simplicity to move. Generally the area is prepared in advance and then the tunnel is moved over the area when the planting is to be done.

Since the original design specified 6′ hoop spacing, the intent was always to remove the cover before risk of heavier snow fall. More often now, growers are going to 5′ spacing (and sometimes 4′) to allow the covers to remain on longer or even permanently.

By having a smaller hoop spacing, it allows the cover to stay on permanently, which allows for a much earlier start in the spring.

The key to the concept of the hanley working is in the rope.

  • The back and forth pattern of the rope resembles the way a person would lace up a boot.
  • Typically there is a spring loaded clip at the base where the rope passes through.
  • Once the rope is fully installed, it is important to tighten it through three passes from end to end.
  • If the rope is not tight enough, the wind will create wiggle and movement sideways.
  • When the plastic is tight enough, it also allows the grower to slide the plastic up the hoop to allow ventilation.

Generally the plastic is about 25′ longer then the tunnel.
This allows the installer to bunch up (pig tail style) the extra poly at both ends between a pair of posts.
It is important to get the plastic as tight as possible lengthwise first.
There must also be a rope from the top of the last hoop to the tie off post.

There are a couple of challenges to consider with the hanley tunnels.

  1. One of these challenges is to create a proper entrance. Typically entrance is achieved by slightly lifting the plastic and ducking underneath.
  2. The other are of challenge is the low shoulder height of the structure. This restricts the use to a couple rows of taller items in the middle and a couple rows of shorter plants along the side. The width of the tunnel does lend itself to three regular size beds.

Once you have learned about the nuances of the hanley tunnels, and asked any questions that come up, you will be better prepared to have these efficient season extenders work for you and your application.

Feel free to look at our Hanley Application page for more information and photos, and give us a call with anything else you require.

We are pleased to have many happy customers these structures are working for, and look forward to you being next!

This concludes our week long series of Season Extension. Check out our new book if you want to know more “So You Want to Buy a Greenhouse…Your Guide to Planning a Greenhouse Purchase”

Season Extension: Moving Your Structure

A significant part of season extension involves moving an intact structure.

This basically allows you to get two (or possibly three) plots of production from one investment.

The idea is to start a relatively cold tolerant crop very early in the season (the timing will be different in different locations).

  1. Once the crop is firmly established in location A, (and it has warmed up) you will move the structure to location B and start another crop.
  2. You will harvest the crop in location A and then after working the soil, plant another crop in location A which is intended for fall harvesting.
  3. After location B is harvested and before frost you will move the structure back to A.
  4. Instead of doing twice in location A you could also choose location C.

A structure can be equipped with wheels which will run over the soil. There is quite a bit of flexibility where you go and the terrain you navigate.

The structure can be equipped with rollers on a track. This will determine where you go and this is usually intended for moving a bigger structure with fewer people.

The most common method of moving is sliding the structure on the soil. The base rail can be wood or steel.

It is critically import to understand the logistics of moving on a structure before you start. It is not hard to move a structure but it is also not hard to do damage.

Having a plan for proper anchoring is very important for a moveable structure. Your structure is at a vulnerable state when you release the anchors. Once you start, the job must be completed quickly. You have to be aware that the anchors may not come out or go back in easily so you may need to give yourself some extra time.

One other area of consideration on a moveable structure is the ends. There must be some sort of a flap or vent along the bottom so that when a structure is being moved, the ends will not uproot plant material. Generally speaking to have this ability in the ends takes away from the structural integrity, so some extra anchoring may be required.

You can see more information and photos on our movable information page. Please don’t hesitate to call us with ANY questions you may have. This can be a very useful addition to your structure, but must be understood correctly.

Stay tuned for part two and three of our season extension series later this week!

Season Extension: Hanley Caterpillar Tunnels

The third area to discuss regarding season extension are those structures that are simple enough to disassemble and relocate to another spot-primarily referring to Hanley Caterpillar Tunnels.

The real lure of these buildings is their low cost and simplicity to move. Generally the area is prepared in advance and then the tunnel is moved over the area when the planting is to be done.

Since the original design specified 6′ hoop spacing, the intent was always to remove the cover before risk of heavier snow fall. More often now, growers are going to 5′ spacing (and sometimes 4′) to allow the covers to remain on longer or even permanently.

By having a smaller hoop spacing, it allows the cover to stay on permanently, which allows for a much earlier start in the spring.

The key to the concept of the hanley working is in the rope.

  • The back and forth pattern of the rope resembles the way a person would lace up a boot.
  • Typically there is a spring loaded clip at the base where the rope passes through.
  • Once the rope is fully installed, it is important to tighten it through three passes from end to end.
  • If the rope is not tight enough, the wind will create wiggle and movement sideways.
  • When the plastic is tight enough, it also allows the grower to slide the plastic up the hoop to allow ventilation.

Generally the plastic is about 25′ longer then the tunnel.
This allows the installer to bunch up (pig tail style) the extra poly at both ends between a pair of posts.
It is important to get the plastic as tight as possible lengthwise first.
There must also be a rope from the top of the last hoop to the tie off post.

There are a couple of challenges to consider with the hanley tunnels.

  1. One of these challenges is to create a proper entrance. Typically entrance is achieved by slightly lifting the plastic and ducking underneath.
  2. The other are of challenge is the low shoulder height of the structure. This restricts the use to a couple rows of taller items in the middle and a couple rows of shorter plants along the side. The width of the tunnel does lend itself to three regular size beds.

Once you have learned about the nuances of the hanley tunnels, and asked any questions that come up, you will be better prepared to have these efficient season extenders work for you and your application.

Feel free to look at our Hanley Application page for more information and photos, and give us a call with anything else you require.

We are pleased to have many happy customers these structures are working for, and look forward to you being next!

Season Extension: Moving Your Structure

A significant part of season extension involves moving an intact structure.

This basically allows you to get two (or possibly three) plots of production from one investment.

The idea is to start a relatively cold tolerant crop very early in the season (the timing will be different in different locations).

  1. Once the crop is firmly established in location A, (and it has warmed up) you will move the structure to location B and start another crop.
  2. You will harvest the crop in location A and then after working the soil, plant another crop in location A which is intended for fall harvesting.
  3. After location B is harvested and before frost you will move the structure back to A.
  4. Instead of doing twice in location A you could also choose location C.

A structure can be equipped with wheels which will run over the soil. There is quite a bit of flexibility where you go and the terrain you navigate.

The structure can be equipped with rollers on a track. This will determine where you go and this is usually intended for moving a bigger structure with fewer people.

The most common method of moving is sliding the structure on the soil. The base rail can be wood or steel.

It is critically import to understand the logistics of moving on a structure before you start. It is not hard to move a structure but it is also not hard to do damage.

Having a plan for proper anchoring is very important for a moveable structure. Your structure is at a vulnerable state when you release the anchors. Once you start, the job must be completed quickly. You have to be aware that the anchors may not come out or go back in easily so you may need to give yourself some extra time.

One other area of consideration on a moveable structure is the ends. There must be some sort of a flap or vent along the bottom so that when a structure is being moved, the ends will not uproot plant material. Generally speaking to have this ability in the ends takes away from the structural integrity, so some extra anchoring may be required.

You can see more information and photos on our movable information page. Please don’t hesitate to call us with ANY questions you may have. This can be a very useful addition to your structure, but must be understood correctly.

FEATURED PRODUCT: Movable Structures

This slideshow requires JavaScript.

The idea of a moving structure allows a user, with a little creativity, to protect 2 -3 times as much area with the same building and investment. It is a very simple concept as long as some basic guidelines are adhered to. It can be applied to many of our standard structures.

Please see our Movable Structures page for more information and don’t hesitate to call us with any questions regarding this unique application.

Happy New Year…2015 in Review

With more than a year complete now of our brand new website (including LOTS of positive feedback-Thank you!), and going into 2016, we thought we’d share some of our top posts and pages with you…in case you missed them!

All of us here at Multi Shelter Solutions wish you a happy and safe new years and we look forward to working with you on your 2016 projects!

Top Applications & Pages
Large Greenhouses
Large Storage Buildings
Mini Greenhouses
Livestock Shelters
Hanley Caterpilliar Tunnels
Small Storage & Garages
Installation Overview
Structure Options
Covering Options

Top Articles
How to Videos
Winter Storm and Your Structures
Building Permit Questions
Roll up Sidewall Considerations
Building Ends
Covering Ends-Plastic & Tarp

Greenhouses 101
Knowing the basics before you buy
Shapes & Configurations
Orientation & Location
Covering Options
Climate & Air Effects
What are you trying to accomplish? What are you dealing with?

New Feature Pages in 2015
Getting Started
Airplane Hangars
Movable Structures
Igloo Round Structures
How to & FAQs
Installation Photo Supplement

happy-new-year-colorful-animation