One of the benefits of a Multi Shelter is the flexibility of the ends.
By building the ends according to your needs your new building can and will truly prove useful.
It is important to remember that you need to be very careful when you have one end closed and the other end open.
When one end is closed you could potentially create a “parachute effect” (trapping air, creating lift) and put a lot of added stress on your building and especially the cover.
Call us to discuss ways of minimizing this if your circumstance really would require one end open and one end closed.
When planning ends, it is important to have sufficient vertical framing to support wind load, doors, fans, etc.
The spacing between the vertical framing will be determined by the amount of opening space required for the doors, etc.
It is important to remember that where ever possible, framing needs to go from top to bottom.
In the event of large openings, the related framing will need to be doubled or tripled.
It is also important to remember that when you are covering your end with a tarp, the top end of the cover is sandwiched between the wirelock channel and the hoop.
When you are covering with plastic, you will be fastening the top end inside the channel with the roof cover even if your roof is a double layer.