We offer two main types of anchoring for our structures: Base Brackets (left pic) and Anchor Posts (right pic). Which one you decide to go with largely depends on your application and location. They are not to be used together, it is a one or the other option. No matter which option you choose, please be aware, there is no such thing as too many anchors!
Although the building can be anchored directly into the ground with Anchor Posts, it can also sit on a slab, curb or beam or it can be elevated on some sort of a wall. Base brackets with lag bolts are supplied standard to fasten the building to the chosen form of foundation. Anchor Posts are available at an additional cost.
Anchor Posts must be set into concrete when:
- the soil has been recently excavated (within the last 5 years)
- it is required by the building code (use of concrete usually classifies the building as permanent)
- extremely windy and exposed areas exist (at least use on the corner posts)
- more than 10% of the anchor post will be out of the ground (upgrading anchor post size may be needed)
- there are areas where erosion has been a problem in the past
Anchor Posts SHOULD NOT be used (and base brackets used instead) when:
- the soil is a very heavy clay (heaving would be a constant problem)
- there is a shallow rock layer
- there are major amounts of rocks interfering with the accuracy of anchor post setting
- the structure will be moved shortly (anchor posts must be cleaned out before reusing)
**Recommendations are based on years of experience. Ultimately the customer is responsible to properly anchor a structure**
Please see our installation pages for a more detailed breakdown of this topic Base Brackets vs Anchor Posts